Tau Inquisitor Force And Review

I received 3 Tau 54mm figures from Papah (papahminis@gmail.com)  You can also find them on ebay (http://picclick.com/?q=54mm+tau).



Package Arrives

 3 blisters and one dead human. :-)  Each blister contained a slightly different poses.  

All the Tau figures had the same body, but had different arms and weapon hand hold positions.  Papah also provided a few extra heads.  Papah did an incredible job designing these figures in such a way that there a so many poses.

As far as the figures go, the sculpts were extremely clean.  Zero flash.  I decided to pin the figures.  I went about it by pinning each arm, and the hands.  I used green stuff to help adhere the pieces to the body.

Each figure came with the following

• 1 Pulse Carbine or Pulse Rifle.  You have the option of choosing it.  To make the pulse rifle you need to cut the Pulse Carbine.  I didn't attempt this.
• Backpack
• Sword
• 2 arms
• Head 
• Should pad
• helmet antenna 

 When pinning the figures, I felt the metal easier to drill than GWs metal figures.  It seem slightly softer for drilling, which made it much easier.



Quality of the figures is top notch.  There is a lot of detail, which painters will love.



Here is my setup when putting the figures together.

• Drill
• Dill bits
• Zap-a-Cap glue
• Green Stuff
• Plyers
• Round 40mm bases